王伟,刘玮,周辉斌,王堃,李乾峰
WANG Wei,LIU Wei,ZHOU Huibin,WANG Kun,LI Qianfeng

• 1:中建三局集团有限公司

摘要(Abstract)：

浅圆仓檐沟高度较高、施工难度大、危险系数高,常规施工方法基于仓壁预埋钢管搭建支撑体系,预埋钢管后期封堵困难,影响筒仓气密性,且拆除时较为危险。提出一种新型可周转檐沟支撑体系,通过在仓壁滑模时预埋螺栓,以滑模吊架进行定位安装,利用高强螺栓实现支撑体系的快速安装与拆除。经过受力计算以及现场施工论证,该支撑体系满足浅圆仓檐沟施工要求且更为安全高效,具有良好的推广价值。
The shallow round silo gutter has a high height,difficult construction,and high risk factor.The conventional construction method is based on pre-embedded steel pipes in the silo wall to build a support system. The pre-embedded steel pipes are difficult to plug in later stages,which affects the air tightness of the silo and is dangerous when removed. A new type of revolving gutter support system is proposed,through pre-embedding bolts during the sliding form of the silo wall, positioning and installation with the sliding form hanger,and using high-strength bolts to realize rapid installation and removal of the supporting system. After calculation of the force and on-site construction demonstration,this kind of support system meets the construction requirements of shallow round silo gutters. It is safer and more efficient,and has good promotion value.

关键词(KeyWords)： 粮仓;滑模;檐沟;可周转;螺栓;支撑
granary;slipform;gutters;turnaround;bolts;supports

Abstract:

Keywords:

基金项目(Foundation): 国家粮食储备库高效建造关键技术研究与应用(CSCEC3B-2020-17)

作者(Author): 王伟,刘玮,周辉斌,王堃,李乾峰
WANG Wei,LIU Wei,ZHOU Huibin,WANG Kun,LI Qianfeng

参考文献(References)：

• [1]沈阳建筑大学．建筑施工模板安全技术规范:JGJ 162—2008[S]．北京:中国建筑工业出版社，2008.
• [2]中国建筑科学研究院，江苏南通二建集团有限公司．建筑施工扣件式钢管脚手架安全技术规范:JGJ 130—2011[S]．北京:中国建筑工业出版社，2011.
• [3]高洁．高耸筒仓顶挑檐支模的方法[J]．建筑工人，2009(10):30-31.
• [4]薛洪，张慧，薛惠敏．扣件钢管三角形悬挑承重脚手架的施工设计[J]．施工技术，2006,35(2):6-7.
• [5]唐介寿．挑檐的稳定问题[J]．铁道标准设计通讯，1982(12):19-20.
• [6]陈培良，蔡磊，刘亚男，等．新型螺栓连接装配式混凝土剪力墙体系设计与建造技术[J]．施工技术，2018,47(12):21-24,34.
• [7]黄广南，杨小平，唐欣薇，等．高水头下不同螺栓连接管片纵缝接头受力性能研究[J]．施工技术，2019,48(21):38-42,59.